Determining the porosity of the rock and the size of the reservoir can be done easily with our user-friendly GeoSpec range of rock core analysers, which provide petrophysicists, geophysicists, geologists and reservoir engineers with critically important information on the nature and behaviour of fluids in core samples. Oxford Instruments has also joined forces with Green Imaging Technologies to ensure it uses the most up-to-date methodology, and associated software, optimised for our instrumentation.

GeoSpec is the industry standard NMR rock core analyser, with installations in almost every major oil producer and SCAL laboratory world-wide. Three models are available operating at 2, 12 and 20MHz. The GeoSpec 2MHz models are the industry standard for routine measurements of relaxation distributions, allowing the prediction of basic petrophysical parameters such as porosity, free and bound fluid determinations and T2 cutoff.

One of the most important properties of crude oil, from the refining point of view, is its wax (paraffin) content. High wax content has a profound impact on its viscosity and thus its propensity to cause blockages in pipelines and equipment, which can be costly. The MQC+ NMR analyser determines wax content in a quick and easy manner, with minimal sample preparation and is ideal for routine operation in a laboratory or production environment.

The refining process also involves the chemical analysis and characterisation of petroleum products. This is where our X-Pulse 60MHz NMR spectrometer plays its part. Combining variable temperature capability with superior spectral resolution, X-Pulse enables a wide range of petrochemical and polymer processes to be monitored and controlled.

The petrochemicals industry produces a huge number of end products, all of which require stringent quality control to ensure that high standards are maintained. From measurement of the hydrogen content of aviation fuels to check combustion properties, to testing the oil content of waxes used in cosmetics, MQC+ analysers offer faster, cleaner methods than traditional wet chemistry.  They can also measure some physical properties such as xylene solubles in polypropylene and the density of polyethylene.

Going one step further, the X-Pulse benchtop NMR spectrometer enables QC methods based on the chemical structure of the products being tested, such as checking the consistency of base oils, monitoring blends, and testing incoming raw materials. X-Pulse is not limited only to hydrogen (proton) measurements – its multinuclear capability means it can also be applied to products containing fluorine, lithium, phosphorus, boron, and many other elements. 

Our range of NMR solutions encourage the development of new product formulations. TD-NMR (Time Domain NMR), using MQC+, gives valuable information on the physical properties of new materials, while the spectroscopic capabilities of X-Pulse allow compositional changes to be made and tested with confidence during formulation of new products.

GeoSpec

MQC+

X-Pulse

Rock Core Analysis

Polymers